
Drill per hole
₹70

Drilling into a Hyderabad wall is not a job for a screwdriver and hope. Between RCC beams, brick, hollow blocks and hidden electrical conduits, one wrong hole can cost you an entire wall repair — or a short circuit. Our verified carpenters bring a proper hammer drill, stud finder, correct anchor plugs for your wall type, and a vacuum to keep dust off your floor. Whether you need one hole for a photo frame or a full flat kitted out with shelves, curtains and mirrors, we cover it same-day across Hyderabad.

₹70

₹99

₹199

₹99

₹299

₹200

₹149

₹99

₹149

₹249

₹99

₹149

₹399

₹349

₹449
Drilling is priced simply: ₹70 per hole with the correct anchor plug included. This covers marking, drilling with a hammer drill, cleaning the dust, inserting the appropriate Fischer or Hilti-style plug, and driving the screw. Bulk work — say, ten holes for a wall-of-frames — is quoted at a lower per-hole rate. There is a small visit charge if the job is under ₹300 total, so most people combine drilling with other small carpentry tasks.
We hang photo frames (₹99 each), mirrors (₹199 including the heavier D-ring hardware needed for glass), wall clocks (₹99) and paintings or canvases (₹149). For a gallery wall or a group of frames, we lay them out on the floor first, mark spacing on the wall with painter's tape and level everything so the arrangement is perfectly aligned before a single hole is drilled.
Curtain rod installation is ₹249 per rod including brackets and end caps — this covers standard 4–8 ft rods and up to three drill points. For heavier double rods with sheers, or ceiling-mounted rails, the price adjusts based on brackets. Roller blind and Venetian blind installation is quoted on site. We always check for concealed wiring before drilling above windows.
Wall shelves start at ₹299 with concealed brackets that carry up to 15 kg per foot. Glass shelves for bathrooms are ₹200 including anti-vibration mounts. Towel rods (₹149), soap dishes (₹99) and hook / hanger fittings (₹99) round out the bathroom kit. If tiles are already installed, we use a diamond bit and go slow — no cracked tiles.
The reason DIY drilling fails in Hyderabad flats is the wrong plug. RCC needs a masonry bit and a nylon plug; hollow AAC / Siporex block needs a specific hollow-wall anchor; a stud wall needs toggle bolts. Our carpenters carry all three, plus stainless steel screws for humid rooms and bathrooms. You get the right hardware for your wall, not a mystery plug from the corner shop.
Same-day drilling and hanging service across Nallakunta, Amberpet, Malakpet, Dilsukhnagar, LB Nagar, Uppal, Habsiguda, Tarnaka, Musheerabad, Saroornagar and 20+ other areas. Every fitting is warrantied for 60 days — if a shelf, rod or frame drops due to a bad fitting, we re-do it free.
9 photo frames aur ek heavy mirror hang karwana tha. Painter's tape se layout kiya, level check — perfect gallery wall. ₹70/hole honest pricing.
AAC / Siporex wall pe TV shelf lagana tha. Hollow-wall anchors laaya, 25kg load easily hold. Duplicate cheap plug wale se pehle try kiya tha — collapse ho gaya.
Curtain rod (double, 8ft) plus 4 hooks. Wiring detector se scan kiya pehle. Neat drilling, dust vacuum kiya after. Better than the previous handyman I used.
Bathroom me glass shelf aur towel rod. Tile crack nahi hui — diamond bit low speed use kiya. Explained sab kuch.
Expert drill & hang carpentry across Hyderabad: We serve Nallakunta, Chikkadpally, Himayath Nagar, Adikmet, Vidyanagar, Narayanguda, Kacheguda, Malakpet, Moosarambagh, Dilsukhnagar, Nagole, LB Nagar, Uppal, Ramanthapur, Habsiguda, Tarnaka, Nacharam, Padmarao Nagar, Bagh Amberpet, Warasiguda, Musheerabad, Gandhi Nagar, Saroornagar, Saidabad and nearby areas — same-day, verified pros, 60-day warranty.